Altair(-X) Build Guide - Page 2

Pre-build preparations

Before assembling the board, there are a few things to check.

1. Briefly check the exterior of the case to make sure that there’s no damage or whatnot (unless you purchased a B-stock unit or similar unit with known defects).

   1. If you have any major flaws on the case that require a replacement, do not continue further and contact the vendor you purchased from immediately.
      RMA requests can’t be handled if the board has been built, so keep everything unused.

2. If you skipped through it, double-check that all package contents listed in part 1 are actually included in the box.
   It’s a nightmare if you get partway through the build and realize a part is missing.

Once you’ve confirmed that the board is ready for assembly, it’s time to assemble.